Can we just call this a party? Because I’m so excited that it kind of feels like a party! And I want an excuse to eat party food. So… there’s that.
This sew-a-long will officially kick off on September 6 and I’ve included a schedule below that I will be personally following, but you are welcome to begin anytime and sew at your own pace. Everything you need to complete the project from start to finish is included in the free pattern, which you can download here.
September 6: Kick off! Make main body panel
September 8: Make paper pieced butterfly and selvedge pocket panels
September 12: Make full pocket panel, assemble to body
September 15: Make optional thread catcher
September 23: Draw prize winners!
Below you will find some notes about the materials used and ways you can modify and customize this pattern to your sewing level and taste, including photos of different mats made to help inspire you! I will be sharing a few tips and tricks, and photos of my progress a long the way based on the schedule, and I hope that you share your progress as you go, too!
Use the hashtags #undercovermakermatSAL and #undercovermakermat on your posts so we can all enjoy each other’s work as we sew-a-long!
If you have any questions as you are preparing or sewing, please don’t hesitate to comment here, send me an email through my Contact page, or send me a direct message on Instagram. Once I decide on my fabrics (the struggle is real!), I’ll share my pulls, but here are a few notes on materials and plenty of inspiration photos to get you started!
I will be making my mat as the original is designed with the paper pieced butterfly and selvedge pockets, but these elements can be changed to just solid fabrics or any patchwork design you like. You will see various ways they are done in the photos at the end.
The finished mat, as it is designed, measures 20″ wide by 23″ long. This size is based off a couple machines I had on hand and what felt good to fit on a variety of tables. This size can be easily changed if you find that you need a larger or smaller mat to cover your machine or fit on your work surface. To change the length of the mat, you simple need to add more to your main body piece. If changing the width of the mat (the 20″ dimension), you will need to equally add or subtract measurements from the main body and the pocket panel pieces. The easiest way is to simple add on to one of the end pockets and keep the inner pocket dimensions the same, but you can, of course, adjust them any way you like. You can also choose to break up the pockets differently than I have hear to suit your needs.
For those who are new to sewing or do not know what a selvedge is, it is the finished edge on a bolt of fabric. There are finished edges on both sides along the width of the fabric, but only one will contain printing and this is the side I use on this project. I cut my selvedges off with about one half inch to one inch or so of the fabric print included, just to make sure I always have enough extra to work with them. The directions on how to work with the selvedges to create the pockets are included in the pattern.
This pattern uses trims or ribbons for securing the secondary pockets and hiding the raw edges, and also for creating the side ties when using it as a machine cover. Below are some trims from my collection that I’ve found at Joanns, Hobby Lobby and even Walmart. Anything between 1/4″ to 3/8″ width is best. If it is too small then you will have trouble enclosing the raw edge of the pocket, any thicker and you cut into your pocket space. Trims that are more solid are best to hide the raw edges, but some lacier style trims can work ok, too.
If you don’t have any trims on hand, you can also use a thin bias binding strip instead. Start with a 1″ or 1.25″ cut strip, fold the raw edges into the center, then fold in half and press and use this as you would a piece of ribbon. You can also you another selvedge with the cut side pressed under. Lots of possibilities!
I think that covers it for now! As I mentioned before, if you have any questions, please don’t hesitate to contact me. I’ll now leave you with a few inspiration photos of other versions I have made and those made by others. You can also see oodles more with the hashtag #undercovermakermat on Instagram and Facebook. (All images are from the fore mentioned hashtag, I will credit all makers later tonight – gotta get the fields mowed now!)