I can’t remember what spurred this last minute idea, but OHEMMGEEE is this adorable or what?! I used my free Sturdy Basket Pattern to make a snow covered chimney to hold my Christmas cards. Now I need to make another to hold Santa!
I used the brick print from Grafic fabric for the basket outer and lining and some faux sherpa for the “snow”. The sturdy fabric basket pattern (find it here) includes directions on making any size basket you wish, so you can customize your chimney, but I made mine 6.5″ wide x 6″ high x 3.5″ deep. In the photo below, I did put a little padding inside the bottom of the basket to make the cards sit a little higher. I didn’t want to make the basket shorter because I wanted to see enough brick.
I made the basket as specified in the pattern, but I did not press the exposed top of the lining in half before folding it over the top of the basket , I just folded it over so the raw edge was exposed. It gets covered by the sherpa so it doesn’t matter. You really don’t even need to make the lining larger than the outer piece since it is covered. I did it because I wasn’t sure if I would fold the sherpa inside or wrap it on the outside just around the top.
To make the snow top, I cut a piece of the sherpa 20.5″ wide by 5″ high then simply wrapped it around the top of the basket and folded half to the inside. The backing of the sherpa clung to the brick fabric really nicely so I didn’t even need to secure it in place, but you could use some glue if desired. If you make your basket a different size, you’ll need to adjust the size of your sherpa cut. Simply add width x 2 + depth x 2. I added a half inch on top of this just to be safe.
This project was so quick and fun. I definitely want to make some for gift giving next year! I’d love to see what you make! Please tag me on social media or use the hashtag #sturdyfabricbasket.
Happy Holidays, friends!