Maker Mat SAL: Pocket Panel Tips & Tutorials

Hello, Hello! If you are just joining the sew-a-long, please scroll down a few posts to find the kickoff and all the tips shared in previous posts or scroll to the bottom of this post for direct links.

So far we’ve worked on the main body of the mat and how to add a machine handle opening, and today I’m going to talk about the pocket panels. If you’re just getting started on your mat, don’t worry, there’s still plenty of time!

Before you begin your pocket panels remember that if you changed the size of your main body, you will need to also adjust the size of the pocket panels! You can do this by changing the size of one pocket or adjusting all the pockets equally. Don’t forget to think about seam allowances when calculating cutting sizes.

One thing to note about the pocket panels is that there are SO many ways you can customize this entire project, but especially this part. You can adjust the sizes, add more or less pockets, you can piece them all with any block you love or you can eve use one solid cut of fabric to make it really quick and easy. Be sure to check out the #undercovermakermat hashtag on social media to see tons of creative inspiration!

pockets

Above you can see just a few variations from mats that I’ve made in the past. The top left follows the pattern as written, which the bottom left follows the same sizing and layout, but uses full cuts of fabric (rather than piecing) with cute fussy cuts! On the right, there is a little mix of both. I substituted my Love Story pattern block for the butterfly and then used solid fabric cuts for the other pockets with some added lace trim details.

First I’m going to share some tutorials and tips on creating the accent pocket panels which are the paper pieced butterfly and the selvedge pockets, then I’ll cover a bit more details on piecing the panels and trim options.

All the information you need to create the accent pocket pieces is included in the pattern (including a link to a tutorial on making the butterfly for beginner paper piecers), but I will go into a bit more detail here and include some additional tips and photos, as well as design variation ideas.

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

PAPER PIECING TIPS

You can find the pattern for my Butterfly Charm Blocks here. All three butterfly designs are the same size and any can be used. The foundation paper piecing tutorial link included in the pattern is from Cassandra Madge and you can find it here. It was so sweet of her to use my pattern as the example for her tutorial!

Our methods of paper piecing are very similar, with just a few differences. I like to use the Add-A-Quarter Ruler, rather than a standard quilting ruler. It does the same job, but is just one of those tools that takes away some room for error. Another paper piecing tutorial I often direct people to is this video from Connecting Threads. You can see the Add-A-Quarter ruler being used.

paper piecing tips | lillyella stitchery

When I paper piece, especially small blocks, I like to use Foundation Paper. You can buy one from Carol Doaks or you can use any thin newsprint. Someone recently mentioned they found this pack from Dick Blick, and you can’t beat the price! I also apologize that I don’t remember who tagged me on that, please let me know if it was you! It is essentially just a thinner paper that creates less bulk and allows for easier removal. You can use any paper for paper piecing, but the thinner you can find, the easier it will make the process.

Another thing I ALWAYS do is to trace the pattern onto the back of the sheet. It does not have to be perfect because you will only be using it for reference, but it helps in a multitude of ways. I use a lightbox, but you can also use a window. Since this is the side where you will place your fabric, you can use these lines as a guide for cutting your fabric pieces. You can still use the printed side, but you have to work with your fabric upside down at that point, and I like to see the prints and placement.

After tracing and selecting fabrics, I also note my fabric selections or color accordingly on this side. Then I always know I’m placing the correct piece. These lines also help you as you sew to make sure a fabric cut will cover a segment. Place the fabric where you would for your next seam, but before sewing, hold the fabric approximately where your seam will be and fold the fabric over as you would when pressing it after sewing. You can then see if your piece is large enough to cover everything it needs to. You can then sew your seam with confidence, because unpicking a paper pieced seam is NO FUN!

Lastly, I find having these lines helps prevent you from missing a segment, which is something I see a lot in paper piecing. When you have the pattern lines on the side where you are placing fabric, you will notice if you’ve missed a piece. You still have to pay attention, but it’s definitely better than flying blind!

paper piecing tips | lillyella stitchery

In Cassandra’s tutorial, you will see her talking about adding some basting stitches to you sections to help when piecing them together. This is important and something I always do as well, however, I put my stitches in the seam allowance as you can see above in the left photo.

Another tip is that when trimming sections to the seam allowance after piecing, do not trim any sides that are on an outer edge (above right). This way you can trim your final block to size after it is completely pieced. It is not uncommon to lose a little bit in each seam, so this ensures you can have the correct sized block in the end, and also lets you trim the block to a slighty larger size, if desired.

After piecing sections, I always remove the paper from the seam allowance only before sewing sections together. This just helps with bulk and allows you to press a flatter seam before adding the next section. You can also see this in the above right photo.

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

SELVEDGE POCKETS

For those who are new to sewing or do not know what a selvedge is, it is the finished edge on a bolt of fabric. There are finished edges on both sides along the width of the fabric, but only one will contain printing and this is the side I use on this project. I cut my selvedges off with about one half inch to one inch or so of the fabric print included, just to make sure I always have enough extra to work with them. The directions on how to work with the selvedges to create the pockets are included in the pattern.

selvedges

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

VARIATIONS

Below are more variations from makes on Instagram to help inspire you!

examples5

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

TRIM

This pattern uses trims or ribbons for securing the secondary pockets and hiding the raw edges, and also for creating the side ties when using it as a machine cover. Below are some trims from my collection that I’ve found at Joanns, Hobby Lobby and even Walmart. Anything between 1/4″ to 3/8″ width is best. If it is too small then you will have trouble enclosing the raw edge of the pocket, any thicker and you cut into your pocket space. Trims that are more solid are best to hide the raw edges, but some lacier style trims can work ok, too.

ribbons

If you don’t have any trims on hand, you can also use a thin bias binding strip instead. Start with a 1″ or 1.25″ cut strip, fold the raw edges into the center, then fold in half and press and use this as you would a piece of ribbon. You can also you another selvedge with the cut side pressed under. Lots of possibilities!

trims

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

Undercover Maker Mat | lillyella stitchery

POCKET BINDING

I like the look of the binding on the pocket because I think it balances the piece nicely, but if you prefer, you can eliminate this step and instead attach the lining to the pocket panel just as you did on the small secondary pockets. Just lay your lining piece, RST, on top of your finished main pocket panel and sew across the top with a 1/4″ seam. Flip the lining to the back, press, and top stitch along the top edge. You can include the fusible fleece when you do this, add it after tucked up to the seam, or skip it all together and use some lightweight interfacing on one or both pieces instead.

pocket-binding

Above are a couple examples I saw on the #undercovermakermat hashtag on instagram that demonstrate this variation. If you have any questions about doing this instead of the binding, just let me know and I’m happy to help!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

Once your full pocket panel is complete, you will baste it to your mat body and bind the entire piece as covered in the pattern. BE SURE TO ADD YOUR SIDE TIES BEFORE BINDING! If you do not plan to use your mat as a cover, you can leave them off. I did forget to add them once and just had to unpick a little bit of my binding and tuck them in, which was not hard to do, so it’s not the end of the world if you forget, or even decide to add them later!

tie double

Just as with trim used to secure the secondary pockets, you can instead use a binding strip for your side ties, or even additional selvedges. If using a binding strip, simply top stitch along the folded edge to close it up. You can tie knots on the ends or stitch them closed.

cover

cover1

Stay tuned next week for one more post talking about the thread catcher before we wrap things up on October 28!

ADDITIONAL POSTS:

Undercover Maker Mat Sew-a-long: All the details

PART ONE: Kickoff! Sizing your mat and tutorials for beginners

Sponsors and Prizes!

PART TWO: Adding a machine handle opening

Maker Mat SAL – Adding a Machine Handle Opening

Honestly, I’ve been wanting to do this tutorial for adding a handle opening to the Undercover Maker Mat for YEARS… but I feel like that’s basically the story of my life! For all who have been waiting, I appreciate your patience! Once great thing about this is that you can add it at any time to any mat – finished, or not. It’s sort of an afterthought, per say, and doesn’t affect anything in the pattern.

Most of my machines do not have handles, so this new little travel machine came into my life at just the right time! This process hurt my brain just a teeny bit, but in the end it’s really pretty easy! I’ve done my best to capture it in photos and I hope it will all be easy to follow (and I think it will once you’re actually doing the steps), but if you have any questions, never hesitate to contact me here or through social media.

This tutorial is for binding the handle opening, however, if you are familiar with facing, that technique will most certainly work for this!

Just one note, I cannot guarantee that this tutorial is detailed enough for complete beginner sewists who are working on this project. There are no complicated techniques, but you may need to familiarize yourself with basic binding techniques to understand some of the terminology and techniques used.

The first step in planning for your opening is to measure, then measure again, then measure about 17 more times. I’ll tell you it is PAINFUL to cut into your precious quilted body, so be sure to check yourself! I took so long doing it that my husband started to make fun of me, but it was worth it. Keep in mind how wide your mat is in relation to your machine and be sure to place your measuring device accordingly. You can see how mine is hanging off the edge a bit. You will need your opening to be just large enough for your handle to slide through. Mine ended up being a little less than 6″ by  3/4″. Your binding will only shrink the opening a very small amount, so you don’t need to take that into account. Also remember, you can always cut the opening larger, but you can’t make it smaller!

When you measure the placement of the opening around the height of the machine, be sure to leave some slack in your tape to account for the bulk of your quilted body. I used the bobbin winder pin on the top of my machine as a gauge. To double check my measurements,  I placed my mat body over my machine and placed the tape measure on my mat. I felt the bobbin winder pin through the mat and noted where the tape measurer hit it. I then removed the mat and placed the tape measure in the same spot on the bobbin winder pin and checked my measurements against the handle. Every machine will be different, so figure out what method works best for you in determining your measurements.

Once you have your measurements, mark them on the body of your mat with an erasable pen or your preferred method and then check your placement again by placing the mat over your machine and feeling through it as best you can to see if the handle is lining up. Then its time to cut! Terrifying, I know. You can do it!

Now will you bind the hole. It’s much like binding the outside a quilt, but you handle the corners differently since they are inside. We will be using a single fold binding method. Cut a piece of binding fabric 1.5″ wide with the length being the diameter of your rectangle plus about 4″.

First, you will mark 1/4″ all the way around the outside of your rectangle on the top/outside of your mat. You will see in my photo above that I have stitch lines 1/4″ around my rectangle. This is from my initial failed attempt at binding that I tore out :D! Since I could see the lines, I did not need to use another form of marking, but you can use an erasable pen or you use a basting stitch.

Next you will clip diagonally into all four corners just shy of your 1/4″ marks as show above. You will now sew the binding down.

You will begin sewing the binding down along one long edge of your rectangle. I did not get a photo before I started sewing, so we’ll use this photo above as a reference for placement. Leave a small tail of unsewn binding for finishing later.

You will place your binding right side down onto your mat body and sew with a 1/4″ seam allowance. When you get to a corner, continue sewing 1/4″ past the opening of your rectangle, which will be indicated by your 1/4″ marks around.

Here’s where it gets just a bit fussy. It’s not difficult, it just takes a bit of finagling under your machine. With your needle down, lift your presser foot and pull the short side of your rectangle opening toward your presser foot so it is in line with the seam you just sewed. The little snips you made in the corners will allow you to do this.

You will then continue sewing your binding strip in a straight line onto this side. If this seems confusing when reading it, I promise it will make sense once you’re sewing. You will continue sewing all the way around your opening, repeating this process on all four corners.

When you get back to where you started, press one end of your binding strip back about 1/4″ and then lay the other end on top of it, trimming it about 1/2″ to 3/4″ past the overlap. Pin in place and finish stitching the seam securely.

Now it’s time to press and turn the binding to the backside. Once complete, you can hand or machine stitch it in place, just as with an outer quilt binding.

Press your binding along the seam toward the hole opening to help it lay flat. You will now miter the corners working on one side at a time. First press one long edge inward and then miter one corner of a short edge as shown above, folding the outer point in to form a 45° angle and press.

Next, fold the other long edge in mitering the corner in the same way and press. Repeat with the other side of the opening.

You will then turn the binding through the opening to the underside of your mat and you will work on pressing and mitering that side. Don’t worry about your miters staying perfectly in place. Just make sure you gave them a good press before turning and they will fall back into place.

If you’re opening is small (and even if not), you may find the next steps a bit fussy, but just take it one step at at time, and you’ll get it done!

Working along one edge at a time, fold the binding strip onto itself, wrong sides together, up to the edge of your opening and press. Repeat for all four sides and feel free to use some glue to help keep it down!

Your piece will now look something like mine above once all sides are pressed. The Mariner cloth I am using was getting a bit frayed because of it’s loose weave, so I had a little trouble keeping things “crisp” for the photos.

To miter the corners on this side, first press one folded short edge down onto the mat down body. You will see above how the miters start to form with the one sides. Next press the long side down onto the mat, mitering the corner into itself as you can see above.

Repeat this step for all four corners, using pins or glue to help keep everything in place. It likely will not be perfect, your corners may be a little sloppy or your wrap around may be a bit uneven, but no one will see it, so don’t stress!

Finally, check that your miters are in place on the front of your mat and hand or machine stitch the binding in place. Now step back and admire your work as you look around for anything else you can cut a hole in!

I hope you have found this down & dirty tutorial helpful and useful! I’m so pleased with how it worked out on my mat and I hope you are, too.

I’m a bit behind schedule on the SAL, but I’ll be sharing some tips on the pocket panels in a couple days so stay tuned! Also, if you’re just joining in, you can find the free pattern and all the details here.

 

 

 

 

Maker Mat SAL Sponsors & Prizes!

We’re just about through week one of the Undercover Maker Mat Sew Along and it’s time to talk prizes! Who doesn’t love the chance to score some sweet gifts while sewing up a super fun project?!

I have some really awesome and generous sponsors that have donated some SUPER FABULOUS prizes to give away during the sew along. Everyone who participates in the SAL and posts progress photos and/or finished pieces on social media with the hashtags #undercovermakermatsal2019 and #undercovermakermat will be eligible to win. All winners will be drawn at random at the end of sew along.

Here’s what’s up for grabs…

String & Story

HollyAnne of String & Story is offering a spot in the Spring session of her online Free Motion Quilting Academy course! YOU GUISE, that’s a $150 value! Isn’t that so sweet of her? You really need to check out this class. She has a session in progress right now, but you can sign up here to be notified about the next class.

Be sure to check out her Instagram posts to see the amazing work she does and what her students accomplish during the course. If you have always thought you could not learn to FMQ like a rockstar – THINK AGAIN! I guarantee HollyAnne can teach you! (And this is using any domestic machine!).

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

Hummingbird Lane Fabrics

You like fabric, right?! Well, we have two chances to win some! First up, I have a bundle of POP! Fabric by Rashida Coleman Hale for Ruby Star from Lesley at Hummingbird Lane Fabrics! This collection is SO CUTE and Lesley carries all the best in modern fabric. She’s also super sweet and amazing to work if you need help or something specific. You can check out her shop here!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

STASH FABRICS

More fabric! Next we have a $25 gift certificate to Stash Fabrics! You know how much I love shopping with them! The shipping is lightening fast and the service can’t be beat! They ship all over the world and have just about every single thing you could ever need from fabric to notions to patterns. You can check out the online shop here!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

EYE CANDY QUILTS

Are you a Fierce Quilter? I’ll say I get a little fierce when I quilt because I hate it so much :D! My brows furrow and my tongue sticks out the side of my mouth, but I do love rocking this pin from Anneliese at Eye Candy Quilts. It lives on my jean jacket and I’ve got one for one of you to win! You can find them here in her Etsy shop and I recommend stocking up on some for gifts for all your quilty friends!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

MAKER PIN CO

If you follow me on social media, you’ve probably seen my super fun collaboration with Amanda at Maker Pin Co! She works with all your favorite designs to create THE CUTEST enamel pins based off quilting patterns and fabric designs, and she’s giving away a $20 shop credit! Here are a couple of my current favorites in her shop AND my Midnight Bite Bat Pin will be out soon, too and I can’t wait!! You can find all the current designs in her shop here!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

Sandy Oz Stitches

Don’t you love handmade gifts? I find that people don’t often make things for me since I make things myself, but there is nothing better than receiving a handmade gift from someone else! Sandy Osborne makes THE CUTEST little sewing accessories, pouches etc AND she knits!! So good. She made the little notion basket and button card shown below for the sew along and is also including a pack of 24ct gold straw needles and a $10 gift card to Super Buzzy! Isn’t that so sweet?! You can check out her Etsy shop here and follow all the adorable things she creates on instagram here!

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

image

LILLYELLA STITCHERY

Hey, that’s me! Last, and I’m gonna say not least :D, I’m offering three winners my entire pattern library! If you don’t know how to paper piece – DON’T Worry! My Take Wing Mini pattern includes complete step by step instructions on how to foundation paper piece for beginners.

image

•  •  •  •  •  •  •  •  •  •  •  •  •  •  •  •

I will have the next SAL post up in a couple days talking about how to add a handle hole to your Maker Mat body, then we’ll talk about pocket panels!

Maker Mat SAL Kickoff – Sizing your Mat & Tutorials for Beginners!

It’s time to kick off the 2019 Undercover Maker Mat Sew Along! I’m thrilled that so many of you are joining in. This is my favorite sew along because I love seeing all the personality that people put into their projects, plus it’s just awesome when I hear how much everyone loves having it and using it!

If you’re just tuning in, you can download the free Maker Mat pattern here. This sew along is open to everyone, there’s no sign up or obligation and anyone is free to join in at any time. I’ll be following the schedule outlined here sharing tips along the way, but you are welcome to sew at your own pace. There will be some amazing prizes up for grabs, too, and everyone who posts their progress photos and finished pieces on social media with the #undercovermakermatsal2019, #undercovermakermat and @lillyellastitchery will be eligible to win! Every post counts as an entry and winners will be drawn at random.

This week we’re pulling fabric and sewing up the main body of the mat. Today I’m going to talk about how to customize the size of the Maker Mat to fit your specific machine and then later this week I’ll be sharing a tutorial for adding a machine handle hole to the body. This is also something you can do to any finished mat if you’ve made one previously.

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

SIZING YOUR MAT

The finished mat as it is designed in the pattern measures 20″ wide by 23″ long. This size was based off a couple machines I had on hand and what felt good to fit on a variety of tables. This size can be easily changed if you find that you need a larger or smaller mat to cover your machine or fit on your work surface. I just got this adorable little travel machine, so I’m making a tiny mat to fit it. Aside from determining the size of your main body, the only other change you’ll need to make to the pattern is adjusting the width of the pocket panel, which I will cover next week.

A couple things to consider when sizing your mat. If you plan to use it as a mat under your machine and also a cover, you will follow the steps below for measuring your machine, but you will also want to think about the table you’ll be on when using the mat under your machine. You may need 25″ or more to fully cover your machine, but may find this leaves too much mat on your table that you don’t have room for. If this is the case, perhaps consider a happy medium. The cover does not need to fully cover the machine to be functional.

To customize the size of your mat, start by measuring the width of your machine and deciding if you’d like any “extra”. The base of my machine measures 13″ across, but since the hand wheel sticks out a bit farther, I’m going to make my body 13.5″ wide.

Next you will measure up and over your machine. You will want to leave a little slack in your tape or add a bit to your measurement to account for a little bulk in the body once it’s quilted. I left some slack in my photos above, so I’m going to make my mat 24.5″ long. If you do not plan to also use your mat as a cover, then you do not need to worry about this measurement and can stick with the original 23″ length in the pattern, or measure your table and decide what size you like.

I’m a visual person so I like to make diagrams of my measurements. Above you will also see my handle hole measurements, but I’ll cover that in more detail later this week. So, to fit my machine, I’ll be making the main body of my Mat 13.5″ wide by 24.5″ long vs the 20″ x 23″ specified in the pattern. (I may choose to add a bit more to the width, just to have some extra pocket space, but I don’t want the sides too “floppy” when it’s covering the machine since I’ll be traveling with it.)

As I mentioned, if you change the width of your mat, you will need to equally add or subtract measurements when making the pocket panel pieces. I will cover this in more detail next week, but for those who like too work ahead, an easy way to do this is to simply add or subtract from one of the end pockets and keep the inner pocket dimensions the same, but you can, of course, adjust them any way you like.

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

FABRIC PULL

This is a piece to have fun with! I usually go with a subtle background so that I can really have fun with the pocket panels, but I’m going to change things up this time. Since my mat will be smaller for this machine, I’m going to make my pockets a little simpler. I will use some prints and perhaps piece one panel of stripes, but I’m going to use that super fun focal print from Alison Glass Handiwork as the body with the bright blue mariner cloth binding.

This is pretty much how I make decisions on fabrics, I try to lay things out as best I can and just step back to take a look. This time when I stepped back, I tripped right over my space heater and conked my head, but I don’t really need ALL of my scalp anyway.

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

TUTORIALS FOR BEGINNERS

If you’re a sewist, but new to quilting, don’t fear! The body of the Maker Mat is a great first project to dip your toes into the world of quilting!

To create the main body of the Maker Mat, you will need basic knowledge of how to layer your top, batting and backing and how to do the quilting stitches. This tutorial from Suzy Quilts covers all the basics. It applies to a large quilt, so working with your main mat body will simply be a smaller and simpler version! Straight line quilting is a great design for beginners, or a crosshatch is a always a nice option, too. I’m not sure its mentioned in the tutorial, but I love using a Herra Marker (a bone folder or scoring tool also works similarly) to mark my quilting lines, especially for something like a crosshatch. Here is a video on using a Herra Marker.

Another quilting technique you will need to know comes at the end of the body and that is binding. This is the little edge “wrap” that goes around the entire piece and seals everything up. Here is a helpful tutorial from Bluprint.

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

So this week share photos of your fabric pulls and your main body progress and be sure to use #undercovermakermatsal2019, #undercovermakermat and @lillyellastitchery when posting! Tomorrow I’ll start sharing some of the amazing sponsors and prizes I have lined up!

Undercover Maker Mat SAL 2019

SALgraphic2019

It’s almost time! The 2019 Undercover Maker Mat Sew Along will kick off on October 7 and run thru October 23! Anyone is welcome to join in and sew along. There is no sign up or obligation and the sew along will be casual! You can download the free pattern here. I will be following the schedule below but you are welcome to sew at your own pace and join in any time!

There are many ways to customize this project and adjust it to your skill level, so please note that many specifics indicated in the schedule are optional. Before the SAL begins, I will share a blog post discussing some of these options, variations and customizations to help you plan. I will talk about sizing the mat to your specific machine and this year I will also be sharing a little tutorial on how to add a hole in the mat for a handle, if your machine has one.

UNDERCOVER MAKER MAT SAL SCHEDULE

October 7: Kick off! Make main body panel

October 15: Adding a machine handle opening

October 17: Pocket panels

October 18: Make optional thread catcher

October 28: Share your finished projects!

In the meantime, you can download the pattern and start thinking about your fabric pull. You can also check out the hashtag #undercovermakermat on social media to see oodles of inspiration! If you’ll be joining in, I’d love for you to share the top graphic from the post and tag me @lillyellastitchery and use the hashtag #UndercoverMakerMatSAL2019!

~ Nicole

DSC_0428 edit B

Mini Maker Station SAL 2019 Kick Off!

DSC_1933

Good morning, friends! It’s time to kick off the 2019 Mini Maker Station Sew Along! I’m thrilled that so many of you have said you’re finally making the time to sew this up for yourself or for holiday gift. Sew Alongs always give me the motivation to create something that I’ve been wanting to.

If you haven’t downloaded the FREE pattern yet, you can find it here. This pattern requires some basic knowledge of sewing and quilting, but any beginner can tackle it! I’ll be including helpful tips, tutorial links, videos and more along the way for every step and I’m always happy to give personal assistance when I can. You can reach out to me anytime through social media or email.

This SAL will run three weeks, ending on October 4, but you are welcome to join in at any time and sew at your own pace. In today’s post I’m going to talk just a bit about selecting fabrics and go over some of the other materials you need. I’m also going to share some tutorial links on basic quilting and binding for those who may be new to quilting, and a couple tips about thread catcher placement. This week we’ll be working on the main body of the Maker Station and the thread catcher. Next Monday I’ll have a new blog post with some tips about creating the fabric basket and working with the magnets.

Share your progress photos on social media with the hashtags #minimakerstationSAL2019 and #minimakerstation to inspire and encourage others, and have a chance to win some fun prizes!

If you haven’t picked up a hardware or are waiting for yours to arrive, don’t worry! You can still begin your project as there is plenty you can do without it, especially during the first week. You can create the entire body and just wait to sew the last bit of binding down until you have the metal, and you can create the thread catcher. There is also quite a bit you can do on the pin cushion and basket next week before you need to add the magnets. You can find hardware kits in my Etsy shop here.

· · · · · · · · · · · · · · · · · · · · · · · · ·

FABRIC & MATERIALS

I want to quickly touch on why I don’t often include “fabric requirement” sections in my patterns, including this one. There are endless ways to layout and customize this project. I never want to lock someone into fabric placements by specifying what you should use where. One person may use three fabrics for the whole project, while another may use thirteen! Also, the cuts on a project like this are all small, so a fabric requirement list would simply be the same as the cutting instructions. The specific sizes of all the pieces you need for each part of the pattern are included at the beginning of each labeled section.

DSC_0845 edit

Now, onto materials! If you have not already purchased a hardware kit or sourced your own materials, you can find more information about those materials needed here, including my sources.

IMG_9046 edit

All fabrics used are standard quilting cotton. You could use some lightweight linens or blends, but thicker materials, such as canvas, may be too bulky for the pin cushion, basket and thread catcher, as they’re all pretty small. In addition to your fabrics, you also need a couple different interfacings. Sometimes these can be optional, as they are often used for added durability, but in this project they are required as they hold the magnets in place and create the basket.

The first is Pellon brand SF101, also known as ShapeFlex. You can find this at any fabric store or Walmart with a craft section. You can also order it online. This can be substituted with another featherweight or lightweight fusible interfacing if you wish, but the SF101 is my preference.

interfacing

The second interfacing you need is Pellon brand Peltex 71F, ultra firm single sided fusible interfacing. I do not recommend substituting this with anything else as it creates the main structure of your fabric basket. Be sure that you get the 71F and not the 70 (sew in) or 72 (double sided fusible). This interfacing is very thick, it should look and feel similar to a piece of cardboard. It should not fold without “creasing” itself. You can also find this interfacing at fabric stores, Walmart (or the like), or online. Next week I’ll share some helpful tips for keeping the basket edges nice and crisp!

walnut

For filling the pincushion, I like to use ground walnut shells because I love the weight and feel, especially with the square shape. It’s like an adorable little bean bag! I purchase mine at a local quit shop, but Plum Easy (the brand I get) also sells online here. If you’re making this for a gift, just avoid the shells if someone has a nut allergy! I have also used polyester stuffing in the cushion, which works perfectly fine!

The last little “extras” you need are some thin ribbon or trim and buttons to hang your thread catcher (which is optional!).

· · · · · · · · · · · · · · · · · · · · · · · · ·

CREATING THE BODY & THREAD CATCHER

If you’re a sewist, but new to quilting, don’t fear! The body of the Maker Station is a great first project to dip your toes into the world of quilting!

To create the main body of the Maker Station, you will need basic knowledge of how to layer your top, batting and backing and how to do the quilting stitches. This tutorial from Suzy Quilts covers all the basics. It applies to a large quilt, so working with your main mat body will simply be a smaller and simpler version! Straight line quilting is a great design for beginners, or a crosshatch is a always a nice option, too. You can see how this looks on my sample below. I’m not sure its mentioned in the tutorial, but I love using a Herra Marker (a bone folder or scoring tool also works similarly) to mark my quilting lines, especially for something like a crosshatch. Here is a video on using a Herra Marker.

mmshome

Another quilting technique you will need to know comes at the end of the body and that is binding. This is the little edge “wrap” that goes around the entire piece and seals everything up. Here is a helpful tutorial from Bluprint.

The body and thread catcher are fairly straight forward and the pattern includes detailed instructions and diagrams on creating these pieces, but if you have questions at any point, feel free to contact me.

DSC_1933 edit crop

When it’s time to sew the buttons for hanging your thread catcher, think about where you will be using your Maker Station. I prefer to hang my thread catcher on the side farthest away from me so my leg doesn’t hit it and it’s not in the way of my pockets, so this placement will vary if you place the station to your right or your left. Also keep in mind it’s “reversible” in a sense, you can place either set of pockets on the inside of your seat or the outside. I sew at least two buttons on my body, but you can sew four buttons (one on every outer edge) so you’re fully versatile!

As I mentioned, this little thread catcher is an optional piece, but I love it. If you don’t use it for scraps, you can use it for extra storage. It’s also a handy design to use elsewhere, like on your sewing machine!

DSC_2046 blog

So those are all the basics for this week as we create our main body and thread catcher. I will be posting some photos of your projects on Instagram through the week, as well as sharing some of the SAL prizes, so I hope you follow along! Remember to use the tags #minimakerstationSAL2019 and #minimakerstation, and share with a friend!

Upcoming Sew Along Schedules

Welp, it’s September already, so let’s get this party going! It’s time for the 2019 Mini Maker Station and Undercover Maker Mat Sew Alongs! More specifics on each will follow soon, but I wanted to get the initial schedule out there so you can start planning. Both of the FREE patterns are available here.

You don’t have to do anything to join in either or both Sew Alongs. There’s no sign up or obligations, you simply sew along with others and have fun! This is a perfect opportunity to make something for yourself that you’ve been putting off or to whip up some holiday gifts! Sew Alongs always give me the motivation I need to get something done and I love being inspired by everyone else along the way.

The SALs will be casual and while I will loosely follow a schedule to share tips and help those who need structure,  you are free to join in at any time and work at your own pace. We will share photos on social media with SAL hashtags as we go and there will be fun prizes and giveaways, too.

First up will be the Mini Maker Station and we will kick things off September 16. Since this project requires hardware, please read through the pattern and source your materials or purchase a hardware kit from my shop here. You will not need the hardware in hand to start the project and can actually get very far on most of it without the hardware, so don’t worry if you don’t have yours by the kickoff.

MINI MAKER STATION SAL SCHEDULE

September 16 – 24: Sew Along Kick Off! Start pulling and share your fabrics. Work on the Maker Station Main Body and Thread Catcher.

September 25 – October 3: Blog post with tips about making the fabric basket and pin cushion. Work on basket and pin cushion.

October 4: Share your finished Maker Stations!

· · · · · · · · · · · · ·

DSC_0428 edit B

Next, the Undercover Maker Mat Sew Along will kick off on October 7 and run thru October 23. You can find the free pattern here. I will be following the schedule below but again you are welcome to sew at your own pace and join in any time! There are many ways to customize this project and adjust it to your skill level, so please note that many specifics indicated in the schedule are optional. Before the SAL begins, I will share a blog post discussing some of these options, variations and customizations to help  you plan! You can also check out the hashtag #undercovermakermat on social media to oodles of inspiration!

UNDERCOVER MAKER MAT SAL SCHEDULE

October 7: Kick off! Make main body panel

October 11: Make paper pieced butterfly and selvedge pocket panels

October 14: Make full pocket panel, assemble to body

October 18: Make optional thread catcher

October 23: Share your finished projects!

Stay tuned here and on social media for more information to come, but in the meantime, download the patterns and get ready! See you soon!

~ Nicole

Mini Maker Station SAL Kick Off!

DSC_1933

Good gravy, how is it February?! I still have a Christmas tree in my studio, but hopefully I can get it down this week :)! I’m SO SO excited to kick off the Mini Maker Station Sew Along (SAL) today! This pattern was in the works for SO long, because A) I’m slow, B) I’m busy, and C) it was a ton of computer work, which I loathe! However, it’s a pretty easy sew, even for beginners. If you haven’t downloaded the pattern, you can find it here.

This SAL will run for a bit over two weeks, ending on February 18. In today’s post I’m going to talk just a bit about selecting fabrics and go over some of the other materials you need. I’m also going to share some tutorial links on basic quilting and binding for those who may be new to quilting, and a couple tips about thread catcher placement. This week we’ll be working on the main body of the Maker Station and the thread catcher. Next Monday I’ll have a new blog post with some tips about creating the fabric basket and working with the magnets.

You are free to work at your own pace and in any order you’d like! Share your progress photos on social media with the hashtags #minimakerstationSAL and #minimakerstation to inspire and encourage others, and have a chance to win a couple fun prizes!

If you haven’t picked up a hardware or are waiting for yours to arrive, don’t worry! You can still begin your project as there is plenty you can do without it, especially during the first week. You can create the entire body and just wait to sew the last bit of binding down until you have the metal, and you can create the thread catcher. There is also quite a bit you can do on the pin cushion and basket next week before you need to add the magnets.

· · · · · · · · · · · · · · · · · · · · · · · · ·

FABRIC & MATERIALS

I want to quickly touch on why I don’t often include “fabric requirement” sections in my patterns, including this one. There are endless ways to layout and customize this project. I never want to lock someone into fabric placements by specifying what you should use where. One person may use three fabrics for the whole project, while another may use thirteen! Also, the cuts on a project like this are all small, so a fabric requirement list would simply be the same as the cutting instructions. The specific sizes of all the pieces you need for each part of the pattern are included at the beginning of each labeled section.

Now, onto materials! If you have not already purchased a hardware kit or sourced your own materials, you can find more information about those materials needed here, including my sources.

IMG_9046 edit

All fabrics used are standard quilting cotton. You could use some lightweight linens or blends, but thicker materials, such as canvas, may be too bulky for the pin cushion, basket and thread catcher, as they’re all pretty small. In addition to your fabrics, you also need a couple different interfacings. Sometimes these can be optional, as they are often used for added durability, but in this project they are required as they hold the magnets in place and create the basket.

The first is Pellon brand SF101, also known as ShapeFlex. You can find this at any fabric store or Walmart with a craft section. You can also order it online. This can be substituted with another featherweight or lightweight fusible interfacing if you wish, but the SF101 is my preference.

interfacing

The second interfacing you need is Pellon brand Peltex 71F, ultra firm single sided fusible interfacing. I do not recommend substituting this with anything else as it creates the main structure of your fabric basket. Be sure that you get the 71F and not the 70 (sew in) or 72 (double sided fusible). This interfacing is very thick, it should look and feel similar to a piece of cardboard. It should not fold without “creasing” itself. You can also find this interfacing at fabric stores, Walmart (or the like), or online. Next week I’ll share some helpful tips for keeping the basket edges nice and crisp!

walnut

For filling the pincushion, I like to use ground walnut shells because I love the weight and feel, especially with the square shape. It’s like an adorable little bean bag! I purchase mine at a local quit shop, but Plum Easy (the brand I get) also sells online here. If you’re making this for a gift, just avoid the shells if someone has a nut allergy! I have also used polyester stuffing in the cushion, which works perfectly fine!

The last little “extras” you need are some thin ribbon or trim and buttons to hang your thread catcher (which is optional!).

· · · · · · · · · · · · · · · · · · · · · · · · ·

CREATING THE BODY & THREAD CATCHER

If you’re a sewist, but new to quilting, don’t fear! The body of the Maker Station is a great first project to dip your toes into the world of quilting!

To create the main body of the Maker Station, you will need basic knowledge of how to layer your top, batting and backing and how to do the quilting stitches. This tutorial from Suzy Quilts covers all the basics. It applies to a large quilt, so working with your main mat body will simply be a smaller and simpler version! Straight line quilting is a great design for beginners, or a crosshatch is a always a nice option, too. I’m not sure its mentioned in the tutorial, but I love using a Herra Marker (a bone folder or scoring tool also works similarly) to mark my quilting lines, especially for something like a crosshatch. Here is a video on using a Herra Marker.

Another quilting technique you will need to know comes at the end of the body and thatt is binding. This is the little edge “wrap” that goes around the entire piece and seals everything up. Here is a helpful tutorial from Craftsy.

The body and thread catcher are fairly straight forward and the pattern includes detailed instructions and diagrams on creating these pieces, but if you have questions at any point, feel free to email me through my website or contact me on social media. I’m always happy to help!

When it’s time to sew the buttons for hanging your thread catcher, think about where you will be using your Maker Station. I prefer to hang my thread catcher on the side farthest away from me so my leg doesn’t hit it and it’s not in the way of my pockets, so this placement will vary if you place the station to your right or your left. Also keep in mind it’s “reversible” in a sense, you can place either set of pockets on the inside of your seat or the outside. I sew at least two buttons on my body, but you can sew four buttons (one on every outer edge) so you’re fully versatile!

As I mentioned, this little thread catcher is an optional piece, but I love it. If you don’t use it for scraps, you can use it for extra storage. It’s also a handy design to use elsewhere, like on your sewing machine!

DSC_2046 blog

So those are all the basics for this week as we create our main body and thread catcher. I will be posting photos of my progress on Instagram through the week, so I hope you follow along! I’ll also be sharing the prizes.

Remember to use the tags #minimakerstationSAL and #minimakerstation, and share with a friend!

Mini Maker Station Sew Along Schedule

I’m really excited to get the Mini Maker Station SAL going and can’t wait to see all your projects! I will officially kick things off on Monday, February 4 and it will run for two weeks (plus a weekend) through February 18. I’m going to keep it very casual, like the Maker Mat SAL, but I will be following a loose schedule and will be sharing some tips along the way about materials and working with the magnets. I encourage you to share your progress photos along the way with the hashtags #minimakerstationSAL and #minimakerstation!

If you’re just joining in, you can find the required hardware list in the pattern (download it here!) or in more detail two blog posts back, and I also have kits available in my Etsy shop here. Don’t worry if you’re still waiting on a kit or sourcing your materials when the SAL begins, as there is quite a bit you can do on the project without it.

· · · · · · · · · · · · ·

SCHEDULE

February 4: Sew Along Kick Off! Blog post about selecting fabrics and the proper interfacing materials needed, as well as notes about measuring and customizing your station.

February 4 – 10: Start pulling and share your fabrics. Work on the Maker Station Main Body and Thread Catcher.

February 11: Blog post with tips about making the fabric basket and pin cushion.

February 11 – 17: Work on basket and pin cushion.

February 18: Share your finished Maker Stations!

I will have a couple prize bundles up for grabs at the end of the Sew Along that I will share next week. One will be awarded to one winner chosen at random from all the posts in the #minimakerstationSAL hashtag and the other will be awarded to one winner drawn at random from all the completed maker stations posted by February 18.

If you have any questions now or along the way, feel free to email me anytime through the contact button here on my website or through social media.

I’ll see you back here next Monday!

Free Holiday Projects

December is here and I’m ready to start some holiday sewing! I’m super late, as always, but I’m only motivated when the holiday spirit is in the air. Today I’m sharing a little round up of my free holiday project tutorials and some ideas on how to use them!

• • • • • • • • • • • • • • • • • • • • • • • • • •

SANTAS CHIMNEY BASKET

First up is a project I shared late last year, Santa’s Chimney Card Basket. I still cant get over how adorable this came out! This basket uses my Sturdy Basket Pattern with dimensions to fit all the Christmas cards you receive. I used brick fabric and faux fur to emulate the chimney, but you can use any fabric you love or that matches your decor. Aside from holding cards, It also makes a cute decoration or creative little gift giving vessel. You can even line it with a plastic bag and fill it with snacks for a party. Click here for the tutorial!

• • • • • • • • • • • • • • • • • • • • • • • •

CUSTOM STURDY FABRIC BASKETs

This next project uses the same Sturdy Fabric Basket pattern as the Chimney, shown in various sizes and shapes, that I made as gift baskets for the Hawthorne Supply Co. Oh What Fun blog hop. I absolutely LOVE making these, if you can’t tell! The possibilities are endless. One of my favorite gifts to give is custom collections of themed items such as food, bath & body products, useful tools, etc. When you don’t know what to do for someone, you can’t go wrong with a gift like this! Once you have your items, you can make the basket any size you need to fit. You can also use non-holiday fabric, perhaps something that matches their decor, so they can also use the basket year round. They’re great for holiday office supplies, remote controls, phones and wallets by the door, hair accessories etc!

Click here for my blog post about these baskets. It includes a link to the Sturdy Fabric basket pattern and details on how I made all the specific shapes and sizes shown. Also included in the blog post is details about the adorable snack bag shown below. It’s another fabulous little gift giving vessel that you can fill with treats for a neighbor, delivery driver, mail carrier! And the bag is then reusable (and washable!) for lunches, snacks, etc!

• • • • • • • • • • • • • • • • • • • • • • • • • •

EPP TABLE TOPPER

Free EPP Table Topper Template | lillyella stitchery

Next is a little hand sewing project I shared a few years ago. It’s quick and easy to sew and makes a perfect table topper, hotpad or mini tree skirt! Click here for the free pattern.

• • • • • • • • • • • • • • • • • • • • • • • • • •

FESTIVE FLUTTER TREE PATTERN

IMG_7094

Fourth is a mini quilt pattern I created using my Butterfly Charm Blocks in the shape of a Christmas tree. You can find the pattern here.

• • • • • • • • • • • • • • • • • • • • • • • • •

REUSABLE BOWL CAP

The last project I’m including today doesn’t have a holiday look on the outside, but it’s a favorite of mine! This pattern is super quick and easy to sew, and customizable to any bowl or round dish. They’re perfect for covering snacks and dishes at holiday parties, carrying a dish to a party, storing leftovers, and they’re great for gifts! Pick up a cute, unique bowl, make a matching cap, and give it as a gift. You can fill it with a treat or kitchen tools and the recipient has a useful and adorable item that they can use everyday. I’ll be sewing up some new ones this week with cute holiday fabrics and will share them soon! Click here for the tutorial.

• • • • • • • • • • • • • • • • • • • • • • • • • •

I hope you’ve found some inspiration in these projects! They’re just a few of the free patterns & tutorials I have available. There are some other great little items to make for gifts, such as my Flex Frame Pouch, and you can find all of them HERE.

Happy Stitching!
~ Nicole